synth_tools

Back

B06B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator JST JWPF series connector, SM16B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a single 0.5 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.127 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a box film cap instead of latch, https://www.neutrik.com/en/product/nc3faah-0 AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack, switched, with full threaded nose, https://www.neutrik.com/en/product/nsj12hf-1 Stacking Jacks, Stereo dual jack, full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hhd2 M Series, 6.35mm (1/4in) stereo jack, switched, with full threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hh-1 Slim Jacks, 6.35mm (1/4in) stereo jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mah A Series, 5 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel: 9.8mm (alpha pots sliders: 3mm above panel, tight but possible mini toggle: 4mm above panel, ample thunkicons: probably too short without extra spacers, use mini toggle pushbuttons: ample space above pcb micro toggle: 0mm above panel; could work with printed spacers mini toggle: 4mm above panel, ample thunkicons: probably too tight; could work with printed spacers mini toggle: ample space above pcb micro toggle: probably too tight; could work with printed spacers mini toggle: 2.5mm above panel, tight but possible mini toggle: 2.5mm above panel, tight but possible mini toggle: ample space above 11.75mm (existing 1p12t rotaries, use 11.25mm holes to minimize capacitance between traces - vias connect through the board, cross at 90° to minimize capacitance between traces vias connect through the board, cross at 90° to minimize capacitance between traces - .3mm for.

New Pull Request

Labels Milestones