synth_tools

Back

**Potentiometer, 9 mm or 16 mm vertical board mount OR: | | | | D3, D4, D5, D8, D9, D10 Standard switching diode, DO-35 Push button switch, normally open, two pins, 45° tilted D Momentary Switch, single pole double throw, separate symbols Quad Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8/TO-99-8 | | | | | R14 | 1 | 3_pin_Molex_connector | 3 | AudioJack2 | Audio Jack, 2 x switching (normalling) stereo jack and switching ground contact, vertical PCB mount, https://www.neutrik.com/en/product/ncj6fa-v Combo I series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav1-0 AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.00u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 6.25u plate Cherry MX keyswitch, 2.75u, http://matias.ca/switches/ Matias ALPS keyswitch 1.25u plate Cherry MX keyswitch 2.00u plate Cherry MX keyswitch, 1.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 6.25u Matias/ALPS keyswitch, 6.25u, http://matias.ca/switches/ Matias ALPS keyswitch 1.00u Matias/ALPS keyswitch, 1.75u, http://matias.ca/switches/ Matias ALPS keyswitch 2.00u plate Cherry MX keyswitch ISO enter PCB Cherry MX keyswitch, 2.00u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 2.25u PCB Cherry MX keyswitch 6.25u Matias/ALPS keyswitch, 1.50u, PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav1-0 A Series, 3 pole male XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj9fi-h Combo I series, 3 pole female XLR receptacle, grounding: ground contact to mating connector shell to pin1 and front panel: mini toggle: 4mm above panel, ample thunkicons: probably too tight; could work with printed spacers and existing lead lengths alpha pots: tight, only 1/2 turn for nut 11mm - rotary, SR2511 style, with very large range of in-tune response, but comments discuss potential fixes, maybe worth it for a single 1 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST PH series connector, B08B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 09-65-2118, 11 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator connector Molex Mini-Fit_Jr top entryplastic_peg Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-08A2, example for new mpn: 39-28-x04x, 2 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator ipc_noLead_generator.py UQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf#page=264), generated with kicad-footprint-generator Samtec.

New Pull Request

Labels Milestones