Labels Milestones
Back10.0mm Neosid SD12k style3 Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=12.0mm, Neosid, SD12, style2, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12.pdf Inductor Radial series Radial pin pitch 33.27mm diameter 50.8mm Vishay IHB-6 Inductor, Radial series, Radial, pin pitch=2.50mm, , diameter=5.0mm, Tantal Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf CP Axial series Axial Vertical pin pitch 7.37mm 10W length 16.1mm width 9mm height 9mm Resistor, Axial_Power series, Box, pin pitch=60.96mm, 11W, length*width*height=50*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf Resistor Axial_Power series Box pin pitch 5.00mm diameter 8mm width 5.0mm Capacitor C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*4.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 7.62mm length 20mm diameter 8mm Inductor, Axial series, Axial, Horizontal, pin pitch=7.62mm, , length*diameter=26.67*12.07mm^2, Vishay, IHA-103, http://www.vishay.com/docs/34014/iha.pdf Inductor Axial series Axial Horizontal pin pitch 5.08mm size 10.2x10.6mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 10697, vertical (cable from top), 4 pins, pitch 9.52mm, size 19x12.5mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type205_RT04505UBLC, 45Degree (cable under 45degree), 12 pins, dual row female, vertical entry, strain relief clip Harwin LTek Connector, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 3.0mm 2 pins LED, diameter 3.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 2.0mm, 2 pins LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 2.0mm 2 pins C1: enlarge footprint; a box film cap instead of A4 Add note resulting from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3fahl1-0.
New Pull Request