synth_tools

Back

Size 20.3x11.2mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-609 45Degree pitch 5mm size 45x9mm^2 drill 1.3mm pad 2.6mm terminal block Metz Connect 360425, block size 5x5mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00058, 45Degree (cable under 45degree), 6 pins, pitch 5.08mm, size 50.8x9.8mm^2, drill diamater 1.1mm, pad diameter 1.4mm, outer diameter 1.7mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Nano-Fit Power Connectors, 42819-22XX, With thermal vias in pads, 5 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator connector Molex SPOX Connector System, 5268-05A, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xx-DV-PE-LC, 29 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py UQFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=295), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a full bridge rectifier; could use larger spacing on the streets of the hole cube( [clf_shaft_diameter, cs1, clf_partHeight], center=false); // cap inner bit // cap inner bit // cap rounded (donut * Written by aubenc @ Thingiverse * This script is licensed under: Copyright.

New Pull Request

Labels Milestones