Labels Milestones
Back= [output_column, row_2, 0]; fm_lvl = [second_col, fourth_row, 0]; pwm_in = [first_col, fifth_row, 0]; //left_rib_x = thickness * 1.2; right_rib_x = width_mm - 9.5/2 - right_rib_thickness - tolerance; // rib + half a jack col_right = width_mm - h_margin; cv_in = [input_column, row_2, 0]; pwm_in = [input_column - h_margin/2, row_1, 0]; audio_out_2 = [right_col, row_7, 0]; manual_1 = [left_col, row_5, 0]; cv_in_2a = [left_col, row_3, 0]; pwm_duty = [input_column, row_2, 0]; audio_in_2 = [left_col, row_3, 0]; manual_2 = [left_col, row_7, 0]; manual_1 = [left_col, row_6, 0]; audio_in_1 = [left_col, row_5, 0]; cv_in_2a = [left_col, row_2, 0]; pwm_in = [input_column + h_margin/2, row_1, 0]; audio_out_2 = [right_col, row_5, 0]; audio_out_1 = [right_col, row_1, 0]; left_rib_x = thickness * 2; right_rib_x = width_mm - thickness*2; // draw a "vertical" wall to mount the circuit board to, dead center pcb_holder(h=10, l=top_row-rail_clearance*2, th=1.15, wall_thickness=1); // lower h-rib reinforcer cylinder(r=hole_r, h=thickness*2); echo("Putting a hole with radius: ", hole_r , " at ", width_mm - h_margin; out_row_1 = v_margin+12; row_2 = row_1 + vertical_space/7; row_6 = row_5 + vertical_space/7; cv_in_1a = [left_col, row_7, 0]; cv_in_1b = [right_col, row_7, 0]; cv_in_1b = [right_col, row_1, 0]; square_out = [third_col, fifth_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_3, 0]; cv_in_2b = [right_col, row_5, 0]; audio_out_1 = [right_col, row_3, 0]; pwm_duty = [second_col, fifth_row, 0]; pwm_duty = [second_col, third_row, 0]; fm_lvl = [h_margin+working_width/8, row_2, 0]; fm_in = [h_margin+working_width/8, row_2, 0]; fm_lvl = [h_margin+working_width/8, row_4.
- NE-CPB-07E Inductor, Radial series.
- Block, 1732425 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732425), generated with kicad-footprint-generator ipc_gullwing_generator.py HTSSOP.
- -2.4343 6.59 facet normal -0.392538 -0.734384.
- 10x8mm^2, drill diamater 1.2mm, pad diameter 3mm, see.