Labels Milestones
BackCopper Layer Stackup: ============================================================= L1 : F.Cu front L2 : B.Cu back Drill file 'precadsr-panel.drl' contains T1 3.200mm 0.1260" (4 holes) T5 15.200mm 0.5984" (1 hole T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes) (with 4 slots T2 5.000mm 0.1969" (1 hole) T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes) (with 4 slots) T2 5.000mm 0.1969" (1 hole) Total plated holes unplated through holes: unplated through holes: ============================================================= T1 3.200mm 0.1260" (4 holes) T5 15.200mm 0.5984" (1 hole) T3 7.000mm 0.2756" (6 holes T4 10.000mm 0.3937" (4 holes T5 15.200mm 0.5984" (1 hole) T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes) (with 4 slots) T2 5.000mm 0.1969" (1 hole Total plated holes unplated through holes: ============================================================= T1 3.200mm 0.1260" (4 holes) (with 4 slots T2 5.000mm 0.1969" (1 hole) T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes) (with 4 slots T2 5.000mm 0.1969" (1 hole) T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes T5 15.200mm 0.5984" (1 hole Total plated holes count 16 Not plated through holes are merged with plated holes count 0 Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel-CmtUser.gbr Normal file Unescape module knurled_cyl(chg, cod, cwd, csh, cdp, fsh, smt) { cord=(cod+cdp+cdp*smt/100)/2; cird=cord-cdp; cfn=round(2*cird*PI/cwd); clf=360/cfn; crn=ceil(chg/csh); echo("knurled cylinder min diameter: ", 2*cord); echo("knurled cylinder max diameter: ", 2*cord); echo("knurled cylinder max diameter: ", 2*cird); if.
- 6.171317e-001 1.747200e+001 facet normal.
- 0.16181 0.830233 facet normal.
- 2 LEDs, tab down, http://www.hanrun.com/public/upload/down/2020/09-11/cc11be56d66bb63d5f1eeb85492439c0.pdf Through.
- "power_pin_not_driven": "error", "similar_labels": "warning", More tweaks after pro.
- -3.927162e-01 facet normal -9.824021e-01 -4.998544e-03 1.867113e-01 facet.