synth_tools

Back

From below) - Clock rate (B100k) (not sure yet which 2 pins diameter 3.0mm Plated Hole as test Point, diameter 1.0mm test point SMD pad as test point, loop diameter2.6mm, hole diameter 1.3mm, length 11.0mm width 6.3mm Capacitor C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*6.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 10.00mm diameter 24mm Electrolytic Capacitor CP Radial series Radial pin pitch 5.00mm diameter 6.0mm Tantal Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf CP Radial series Radial pin pitch 5.00mm diameter 8.0mm 2 pins LED diameter 5.0mm z-position of LED center 3.0mm, 2 pins, pitch 5mm, size 50x10mm^2, drill diamater 0.7mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00301 pitch 10mm size 115x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-3-10-5.08, 10 pins, pitch 5mm, size 30x7.6mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00248 pitch 10.2mm size 35.6x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00002 pitch 5mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-10-5.08, 10 pins, pitch 3.81mm, size 22.8x7.3mm^2, drill diamater 1.3mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-LC, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole.

New Pull Request

Labels Milestones