Labels Milestones
Back— Do not assume anything works!** submodules ``` git clone git@github.com:holmesrichards/precadsr.git git clone --recurse-submodules git@gitlab.com:rsholmes/precadsr.git ``` ``` git clone --recurse-submodules git@gitlab.com:rsholmes/precadsr.git ``` ``` git clone --recurse-submodules git@gitlab.com:rsholmes/precadsr.git ``` ``` git clone --recurse-submodules git@github.com:holmesrichards/precadsr.git git clone git@gitlab.com:rsholmes/precadsr.git git submodule update Find and replace last few thin traces, fix teardrops and gnd fill f63cfba954 Embiggen traces, add teardrops f63cfba9541079f9f5e1341fca38abad6837ea65 Add 55k-ish resistor to coarse knob (doublecheck this placement). Actual value unclear (see below).
Argument for a box film cap instead of latch, https://www.neutrik.com/en/product/nc3faah1-0 AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbh-b B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3faah AA Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahr2-0 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) jack receptacle, vertical pcb mount, https://www.neutrik.com/en/product/nlj2md-v speakON Chassis Connectors, 4 pole chassis connector, black D-size flange, mirrored self tapping screw holes (A-screw), vertical PCB mount, https://www.neutrik.com/en/product/nc5mbh B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4mbv A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) jack receptacle, vertical pcb mount, replaces NL2MD-V, https://www.neutrik.com/en/product/nl2mdxx-v speakON Chassis Connectors, 4 pole chassis connector, nickel metal square G-size flange, countersunk thru holes, vertical PCB mount, https://www.neutrik.com/en/product/nc4mav B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel: 9.8mm (alpha pots sliders: 3mm above panel, tight but possible mini toggle: 4mm above panel, tight but possible micro toggle: probably too short without extra spacers, use mini toggle switch // steps: slider, led, switch //hole.
- -5.026220e-001 8.616840e-001 6.979911e-002 facet normal 3.562750e-001.
-
X="5.05" y="1.45"/>
# 4-layer condition "A.Type == 'pad' .