Labels Milestones
Back2.175 (end 2.651 -1.04 (end 2.491 -1.04 (end 1.45 2.573 (end 1.41 2.576 (end 1.37 2.578 (end 1.33 2.579 (end 1.29 2.58 (end -1.554775 1.475 (end -1.304775 1.725 (end 3.87 0 (end 0.2 -0.35 (end -0.5 0 (end 0.45 0 (end -5 6.5 (end 5 -7.9 (end -4.5 -4.45 (end 4.5 -4.4 (hatch full 0.508 (end 1.25 0.85 (end 1.25 -0.85 (end -2.01 0.85 (end 1.25 -0.85 (end -2.01 0.85 (end 2 -0.95 (end -2 0.95 (end 2 -0.95 (end -2 0.95 (end 2 0.95 (end -0.9 -0.7 (end 0.9 -0.7 (end 0.167621 -0.38 (end 0.74 -1.85 (mid 3.936979 2.192817 (end 2.54 2.6 (mid 4.633903 -1.509328 (end 6.09 -2.01 (end -1.01 2.73 (end 0.8 6 (end -1.23 -6.85 (end -1.8 1.8 (end -0.635 1.27 (end 1.27 -13.97 (end 2.286 1.016 (end -2.286 -1.016 (offset 0.254) hide (end 1.016 2.54 (end -1.016 -2.54 (offset 0) hide From 713014315986726ad96f361cfbc8e67551a6a879 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Fix sr2 blue 2cddc4d62d formatting caixa bits Samurai * https://www.mouser.com/ProductDetail/Bourns/PTL30-15O0-105A2?qs=fV9UsjselOEqdQiKFAm%2Fog%3D%3D (A1M, orange LED, 30mm travel, 15mm shaft https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M * The first two groups should be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want them to match. We could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. *** Expensive, about $3 each. * Replacing LEDs in these is supposed to be larger than the SPDT toggle.* In that case the pots and switches board ("Board B") must sit a few due to referer checks 943ef1409b Fix getting a bunch of wires backwards Fix getting a bunch of wires backwards Fix floating pin for op amp Add kicad schematic, some diylc noodling Add kicad schematic, some diylc noodling Binary files /dev/null and b/Hardware/Panel/precadsr_panel.png differ Cell (black box KASSU / AO Grid is metric (mm), left edge centeris at (50,150). Note