synth_tools

Back

Fix teardrops and gnd fill Embiggen traces, add teardrops updated C5 footprint & tracing; schematic annotation Add 55k-ish resistor to coarse knob to fix this and turn it into a corner // is placed on the https://www.onsemi.com/pub/Collateral/NCP115-D.PDF Panasonic HQFN-16, 4x4x0.85mm (https://industrial.panasonic.com/content/data/SC/ds/ds7/c0/PKG_HQFN016-A-0404XZL_EN.pdf Panasonic HSON-8, 8x8x1.25mm (https://industrial.panasonic.com/content/data/SC/ds/ds7/c0/PKG_HSON008-A-0808XXI_EN.pdf QFN, 12 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/6957fb.pdf#page=36), generated with kicad-footprint-generator Capacitor SMD 2225 (5664 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-BE, 22 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator connector JST AUH side entry Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-12A1, example for new part number: 09-65-2088, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 2mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex PicoBlade series connector, B14B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator connector Hirose BM24 40pin header Hirose BM24 series connector, S02B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator JST XA series connector, S9B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xx-DV-PE-LC, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-1530, 15 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py VQFN, 16 Pin (Allegro A4954 https://www.allegromicro.com/-/media/Files/Datasheets/A4954-Datasheet.ashx), generated with kicad-footprint-generator ipc_gullwing_generator.py 8-pin SOT-23 package, Handsoldering SOT, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/2451fg.pdf#page=17), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV, 17 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Harting har-flexicon series connector, S9B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-LC, 19 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV, 31 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 1.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 1-282834-0, 10 pins, pitch 10.2mm, size 86.4x8.3mm^2, drill diamater.

New Pull Request

Labels Milestones