synth_tools

Back

MicroClasp Wire-to-Board System, 55932-1310, with PCB locator, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator connector Hirose DF13 through hole, DF13-05P-1.25DSA, 5 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-171 , 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 1.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, length 10.0mm, width 2.4mm solder Pin_ with flat fork, hole diameter 1.3mm, length 10.0mm, width 2.4mm solder Pin_ diameter 1.3mm, wire diameter 1.0mm wire loop bead wire loop as test point, pitch 3.81mm, size 11.3x7.3mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10686 pitch 3.5mm size 39.2x7mm^2 drill 1.2mm pad 3mm Terminal Block TE 282834-8 pitch 2.54mm length 7mm width 3.5mm solder Pin_ loose fit solder Pin_ with flat fork solder Pin_ loose fit solder Pin_ diameter 1.3mm, wire diameter 1.0mm test point wire loop as test Point, diameter 2.0mm, 2 pins diameter 3.0mm z-position of LED center 1.0mm, 2 pins LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 6.0mm, 2 pins LED, diameter 3.0mm z-position of LED center 1.0mm 2 pins LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2, 2 pins, pitch 2.54mm, size.

New Pull Request

Labels Milestones