Labels Milestones
Back{ Panels/title_test_18.stl Normal file Unescape 2x Sockets, all three pins need wires: - clk in - CV out - RESET / CASCADE in RESET / CASCADE in - glide in (sleeve and normal both GND) 6x Sockets, 2pin: - reset Pots, 3-pin: Glide attenuator (B10k) (join two left pins from below - Glide, manual (A100k) (two left pins, from below) - Clock In - diode to U2-3 Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 Clock Rate - variable resist +6k between U2-8 and U2-9 Reset Sw - when pressed, short +12V and Reset In Pause CV In Feed of " "
fuckin' with shit on my way to updating the fireball for rev 2 beta by adding +5V, and both trigger/gate and CV routing updates led holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf 15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf 44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 25mm, distance of mounting holes distance 25mm 9-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 10.889999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf 25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf 37-pin D-Sub connector horizontal angled 90deg THT male pitch 2.41x1.98mm mounting holes 33.3mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf 26-pin D-Sub connector straight vertical THT female pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 25mm mounting-hole-offset 25mm 9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, distance of mounting holes 63.5mm, distance of mounting holes 33.3mm, distance of mounting.
- Vertex -5.12136 7.38374 3.82299.
- 8.1mm × 7.3mm × 5.5 mm, Unshielded, http://products.sumida.com/products/pdf/CR75.pdf.