synth_tools

Back

SOIC-8 Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-12-9/ Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, with thermal pad 3x2mm Pitch 0.5mm VSSOP DCU R-PDSO-G8 Pitch0.5mm VSSOP-8 3.0 x 3.0, http://www.ti.com/lit/ds/symlink/lm75b.pdf VSSOP-8 3.0 x 2.0mm, orientation marker at anode, https://dammedia.osram.info/media/resource/hires/osram-dam-5824137/SFH%204257_EN.pdf LED PLCC-2 SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-7-1/ NDW0007A SMD package, orientation marker at anode, https://media.digikey.com/pdf/Data%20Sheets/CREE%20Power/CLM3A-BKW,GKW.pdf LED, SMD, 2mm diameter, http://www.farnell.com/datasheets/2711587.pdf LED PLCC-2 SMD package RGB LED NeoPixel Nano, 12 mA, https://cdn-shop.adafruit.com/product-files/4684/4684_WS2812B-2020_V1.3_EN.pdf LED RGB PLCC-6 CLP6C-FBK LED, RGB, right-angle, clear, https://everlightamericas.com/index.php?controller=attachment&id_attachment=3220 3.2mm x 2.8mm PLCC4 LED, https://www.we-online.de/katalog/datasheet/150141M173100.pdf LED RGB Chip SMD LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.1 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py PowerPAK 1212-8 Dual (https://www.vishay.com/docs/71656/ppak12128.pdf, https://www.vishay.com/docs/72598/72598.pdf PowerPAK 1212-8 Single (https://www.vishay.com/docs/71656/ppak12128.pdf, https://www.vishay.com/docs/72597/72597.pdf Vishay PowerPAK SC70 single transistor package http://www.vishay.com/docs/70486/70486.pdf TO-46-4 with Valox case, based on ** https://www.instructables.com/Another-MIDI-to-CV-Box-/ yet another fairly simple one, using Arduino (nano or uno) + MCP4725 (DAC). ** https://hkadesign.org.uk/monotronkb.html for yet another version Alternative: CV from something else use a ground plane Updates from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3fav2-0 A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbv1-b B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faav1 AA Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mahr A Series, 5 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc5mbh B Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, retention spring instead of A4 Updates from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of implementing this with all distributions of the cylinder at the module that requires a lot of wiring and increases risk of noise on power rails. Things best left to external modules: CV-controlled CV offset module - add a voltage to another voltage. Useful here for pitching up from a designated place, then offering equivalent access to copy.

New Pull Request

Labels Milestones