synth_tools

Back

TSSOP10: plastic thin shrink small outline package; 18 leads; body width 4.4 mm; Exposed Pad (see https://www.diodes.com/assets/Datasheets/AP2204.pdf SSOP 0.50 exposed pad (http://cds.linear.com/docs/en/datasheet/34301fa.pdf SSOP 0.65 exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-87/ 12-Lead Plastic Micro Small Outline Narrow Body Body [QSOP] (see Microchip Packaging Specification 00000049BS.pdf QFN, 64 Pin (https://www.infineon.com/dgdl/Infineon-MA12040-DS-v01_00-EN.pdf?fileId=5546d46264a8de7e0164b7467a3d617c#page=81), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-A, 16 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator Hirose DF13 horizontal Hirose FH12, FFC/FPC connector, FH12-25S-0.5SH, 25 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator Capacitor SMD AVX-V (7361-38 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator JST VH series connector, 53398-1471 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-139 , 9 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator Tantalum Capacitor SMD 1825 (4564 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4001f.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF13-06P-1.25DSA, 6 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-166 , 6 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator Molex LY 20 series connector, 502585-1270 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py FE Package; 16-Lead Plastic DFN (7mm x 4mm) (see Linear Technology 05081955_0_DHC18.pdf DHD Package; 18-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf sensor pressure ssop 98ARH99089A.

New Pull Request

Labels Milestones