synth_tools

Back

Diameter 0.7mm, length 6.5mm, width 1.8mm solder Pin_ with flat with hole, hole diameter 1.0mm wire loop as test Point, square 1.0mm side length SMD rectangular pad as test point, loop diameter2.548mm, hole diameter 1.3mm, wire diameter 0.5mm test point THT pad as test point, loop diameter2.548mm, hole diameter 1.0mm wire loop as test Point, square 2.5mm side length, hole diameter 1.2mm THT pad THT pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-603, 45Degree (cable under 45degree), 9 pins, pitch 5.08mm, size 61x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10690, 13 pins, pitch 5mm, size 30x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00070, 5 pins, pitch 10mm, size 52.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-310, 45Degree (cable under 45degree), 4 pins, pitch 2.5mm, size 20.5x5mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/20223.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00242 pitch 10.2mm size 66x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00249, 10 pins, dual row male, vertical entry Harwin LTek Connector, 20 pins, dual row female, vertical entry, strain relief clip Harwin LTek Connector, 44 pins, surface mount SMD package for Standex Meder DIP reed relay Standex-Meder SIL-relais, UMS, see http://cdn-reichelt.de/documents/datenblatt/C300/UMS05_1A80_75L_DB.pdf Resistor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-A, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf.

New Pull Request

Labels Milestones