synth_tools

Back

28.6mm width 14.3mm Bourns 5700 L_Toroid, Vertical series, Radial, pin pitch=27.50mm, , length*width=33*15mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 7.62mm length 16mm diameter 6.3mm height 11mm Non-Polar Electrolytic Capacitor C, Rect series, Radial, pin pitch=6.00mm, , diameter=12.0mm, MuRATA, 1900R, http://www.murata-ps.com/data/magnetics/kmp_1900r.pdf Inductor Radial series Radial pin pitch 12.5mm length 5.1mm diameter 3.1mm C, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=17*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf C Axial series Axial Vertical pin pitch 2.50mm diameter 3.8mm width 2.6mm Capacitor C, Rect series, Radial, pin pitch=2.50mm, , diameter=4.5mm, Tantal Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf CP Radial series Radial pin pitch 10.16mm 0.25W = 1/4W length 6.3mm diameter 2.5mm SMD pad as test Point, square 3.0mm side length, hole diameter 0.9mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 1-770874-x, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator connector Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0508, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 48 Pin (http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.3.pdf#page=67), generated with kicad-footprint-generator JST XA series connector, 53780-0270 (), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-BE-A, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-102-02-xxx-DV-BE-LC, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Molex SPOX Connector System, 43045-1021 (alternative finishes: 43045-100x), 5 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py LFCSP, 16 Pin (http://cds.linear.com/docs/en/datasheet/37551fd.pdf#page=23), generated with kicad-footprint-generator JST EH series connector, 502382-1070 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py DD Package; 8-Lead Plastic PSOP, Exposed Die Pad (see https://www.diodes.com/assets/Datasheets/AP2204.pdf SSOP 0.50 exposed pad - Ref http://pdfserv.maximintegrated.com/land_patterns/90-0349.PDF DFN, 10 Pin (https://fscdn.rohm.com/en/techdata_basic/ic/package/Jisso_MLGA010V020A-1-2_Rev005s_E2(MSL3).pdf ST HLGA, 10 Pin (http://www.ti.com/lit/gpn/tps63030#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py TQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/drv8801.pdf#page=31 MO-220 variation VGGC), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 mm LED 5 mm x 0.3 mm x 20 mm row spacing, 22x23x17.53mm (https://katalog.we-online.com/ctm/datasheet/750343373.pdf 28-lead TH, EconoPACK 2, same as Infineon_EasyPIM-2B, https://www.st.com/resource/en/datasheet/a2c25s12m3.pdf 35-lead TH, ACEPACK 2 CIB, PressFIT, https://www.st.com/resource/en/datasheet/a2c50s65m2-f.pdf 25-lead TH, SDIP-25L, https://www.st.com/resource/en/datasheet/stgips20k60.pdf Valve ECC-83-1 round pins Valve ECC-83-2 flat pins Mini-Pentode, 5-pin, e.g. JAN6418 Valve Mini-Pentode 5-pin JAN6418 Varistor, diameter 9mm, width 3.9mm, pitch 7.5mm size 82.5x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00014, 4 pins, pitch 3.5mm, size 21.7x7mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00296, 11 pins, pitch 5mm, size 50x9.8mm^2, drill diamater 1.2mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-303.

New Pull Request

Labels Milestones