synth_tools

Back

Pegging the output jacks working_height = height - v_margin - title_font_size*2; working_width = width_mm - thickness*2; left_rib_x = hole_dist_side + thickness; Experimenting with more panel layout ideas left_rib_x = thickness + 6 + tolerance; rotate_vector_cos = 0.94; // 'x' of 20 degree rotation rotate_vector_sin = 0.34; // 'y' of rotation left_edge = -rotate_vector_sin * rail_depth; right_edge = height - v_margin; working_increment = working_height / 5; row_2 = row_1 + v_margin + 12; row_1 = v_margin+12; row_2 = row_1 + v_margin + 12; //knob_radius top_row = height - v_margin; working_increment = working_height / (8+tolerance/3); // generally-useful spacing amount for vertical columns of stuff col_left = thickness * 1; right_rib_x = width_mm - right_rib_thickness; //} module make_surface(filename, h) { for (a = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16]) linear_extrude(height=a/h, convexity=10) projection(cut = true width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 first_row = 25.65; //mm second_row = 47.25; //mm third_row = 65.75; //mm fourth_row = 88.25; //mm fifth_row = 108.75; //mm // Center adjust to fit in glide controls From a5c5ff12ce18fecaaf346f973863d12bf361ac82 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Change transistor footprint to inline_wide, fix DRC ground plane Updates from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3fahr2-0 A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fahr1 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack without switching contact, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav1-0 AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched.

New Pull Request

Labels Milestones